ROPE OR OTHER ROUND STYLE
CHAINS:
Chain Thickness should be 4.5mm or Smaller (5/32nd of an Inch)
OMEGA OR HERRINGBONE STYLE CHAINS:
If used on a flat, style chain (like herringbone or omegas)
7.5mm or smaller (1/4th inch)
Bottom is less than 1/16th of an Inch (So can fit in a ring or hole larger than
that)
Will need to be soldered by a professional jeweler.
(Can be soldered at the Concepts Factory for $8.00 additional dollars) Add
To Cart |
